Customer Story: Milking Efficiently with a Dairymaster Swing-Over Parlour
Milking is fun again with the MobiStar
Customer story: From an Old BouMatic Parlour to the Dairymaster 2x 14 MobiStar Swing
Farm Profile:
A family-run dairy farm in Hesse, Germany, with around 130 dairy cows, operated as a civil-law partnership (GbR). Farm management consists of 2.5 full-time equivalents, supported by one additional full-time family employee and one hired worker.
The farm covers 150 hectares, including 105 hectares of grassland. It is fully mechanized in-house (except for maize harvesting) and manages approximately 145 dairy cows plus all female replacement stock.
The Starting Point: A Milking Parlour at the End of Its Life
For more than three decades, a BouMatic D6 side-by-side parlour had served the farm reliably. However, after more than 30 years of operation, it had simply reached the end of its useful life. It was cramped, dark, and time-consuming to use. Milking required two people working for 3.5 hours every day—twice a day, 365 days a year. It was clear that something had to change. The only question was: what?
An Automatic Milking System (AMS) was never seriously considered. Given the herd size, at least two milking robots would have been required, resulting in significantly higher investment costs than the solution ultimately chosen. In addition, not every technology is suitable for every farm or farming family. On this farm, the decision was made quickly: the replacement would be a modern, high-performance milking parlour—and the Dairymaster MobiStar 14 SwingOver convinced the farm owners.
The New Installation: Simple, Robust, Fast
At the heart of the modernization project is a Dairymaster 2×14 MobiStar Swing, a swing-over milking parlour specifically designed for simplicity and durability. To integrate the system into the existing facilities, a small extension was built alongside the current barn. Construction was completed quickly and without complications: less than 12 months passed between the first meeting with the dealer and the first milking session in the new parlour.
The system stands out thanks to its sturdy fixed frame and rigid cow-positioning rails. While spring-loaded rails could have made the cows’ initial adaptation slightly easier, this ceased to be an issue after a short adjustment period, and the rigid rails offer the advantage of reduced wear and tear. The standing platform is slightly sloped outward, and a manure gutter was deliberately omitted due to previous negative experiences. Rubber flooring provides additional comfort for the cows. The milking platform itself is raised by approximately 10 cm, requiring cows to take a small step when entering and exiting the parlour.
From a technical perspective, the focus was deliberately placed on the essentials. The system includes automatic cluster removal, but cow identification, a second milk line, and extensive sensor technology were intentionally omitted. This reduces costs, minimizes potential points of failure, and, in any case, all employees know every cow by name. Additional technology can be retrofitted at any time if required.
The total investment in the milking equipment amounted to approximately €110,000. Even when including the cost of the building extension, this solution proved significantly more economical than a comparable AMS installation for the herd size involved.
The Results: Less Time, More Satisfaction
The figures speak for themselves. Instead of requiring two workers for 3.5 hours, milking now takes only 1.5 hours with two people. When carried out by a single person, it requires only around 15 additional minutes. The new parlour can handle approximately 130 cows per hour—a level of performance that has fundamentally transformed daily operations.
The difference is noticeable. What was once an obligation performed in a cramped, dark parlour has become an enjoyable task again. The new parlour is bright, spacious, and welcoming, and the cows willingly enter it. Comfort has improved significantly for both animals and people.
“By 6:30 p.m., the day is finished—the cows are milked, all animals are fed, and you can actually start thinking about what to do with your free time,” the family explains when describing their new reality.

Maintenance and Operation: Straightforward and Independent
Another major advantage of the MobiStar is its manageable operating costs. There are no mandatory service contracts. All common wear parts and spare components are kept on the farm and can be installed by the operators themselves. For larger maintenance tasks, a service company based in Thuringia, Germany is available. This independence from external service technicians was a deliberate factor in the purchasing decision.
A particularly practical feature is the MobiStar’s modular design. The roof above the parlour can be removed easily, allowing the entire unit to be lifted out in one piece and reinstalled elsewhere if necessary. In this respect, it offers a flexibility similar to that of an AMS system, but without the associated complexity.
Conclusion
The transition from the old BouMatic parlour to the Dairymaster MobiStar 14 SwingOver has not revolutionized this farm—but it has made it noticeably better. Milking time has been reduced by more than half, cow comfort and working conditions have improved substantially, and investment costs remained within a reasonable range.
Most importantly, the system delivers exactly what the farm requires: simplicity, durability, and reliability. It demonstrates that modern dairy farming does not necessarily require the most expensive or technologically complex solution—only the one that best fits the farm’s needs.
Editorial Stallgeflüster Nr. 135, Juni 2026: DairyMaster









